The use of different polyelectrolyte and active ingredients in the formulation of our deflocculant, allows us to offer customers customized solutions, which improve the workability and rheology of the pastes, increasing in most cases productivity and product quality.
Our range of deflocculants ADISPER, including traditional formulas based on sales of Na+ and Mg2+ such tripolyphosphate, hexametaphosphate, polyacrylate and silicate. Furthermore, we also manufacture new custom developments based on different molecular weight polycarboxylates, phosphonates, etc.
Within our range of deflocculants ADISPER, we can highlight:
PRODUCT | APPEARANCE | PASTE |
ADISPER TP | SÓLIDO BLANCO | UNIVERSAL |
ADISPER V-1443 | SÓLIDO GRANULAR | SLIP AND ENGOBE |
ADISPER V-677 | SÓLIDO BLANCO | UNIVERSAL |
ADISPER CN-105 | SÓLIDO BLANCO | UNIVERSAL |
ADISPER V-1118 | SÓLIDO BLANCO | UNIVERSAL |
ADISPER ST | LÍQUIDO AMBAR | UNIVERSAL |
ADISPER V-788D | LÍQUIDO AMBAR | UNIVERSAL |
ADISPER AM | LÍQUIDO AMARILLENTO | UNIVERSAL |
ADISPER V-1532 | LÍQUIDO AMARILLENTO | SLIP AND ENGOBE |
ADISPER V-1156 | LÍQUIDO INCOLORO | UNIVERSAL |
Taking in care, the different nature of each of the thickeners that we sell, we have succeeded in formulating multifunctional products, which not only act as viscosity regulators but that correct defects due to the preparation and implementation of pasta, and / or the production process.
To optimize the production process is essential to regulate the viscosity of the pastes, and being able to correct the defects that may arise due to the preparation of pastas (eg overdosage of deflocculant), application of pastes (fluency, thixotropy ...), and / or the production process (application method, ...)
PRODUCT | PASTE | FURTHER ACTION |
ADICEL CL-38 | UNIVERSAL | ANTISETTLING |
ADICEL CL-44 | GLAZES | BINDER FOR GLAZE |
DREGLESS | GLAZES | REDUCE DRYING TIME |
Compared to the traditional use of CMC's, such additives provide the glaze not only binding power, but higher thixotropy and better control of the drying time. This allows good thickness of the layer of glaze, and avoids defects in the surface layer.
PRODUCT | PASTE | FURTHER ACTION |
ADICEL V-753 | GLAZES | HIGH VISCOSITY |
ADICEL V-753G | GLAZES | LONG DRYING TIME |
ADICEL V-955 | GLAZES | VERY HIGH VISCOSITY |
ADICEL V-1210 | GLAZES | HIGH THIXOTROPY |
These two lines are formulated in both solid form (adsorbed on kaolin) and liquid form, at different concentrations. They are characterized by wide spectrum biocides to combat both bacterial growth and fungal growth.
Preservatives formulated with isothiazolone (MIT / CIT) are highly effective at very low concentrations and have high stability in usual pH ranges (6-8.5). Formulations benzoisotiazolonas derivatives (BIT) have the advantage of high stability even at pH's above 10.
The main products sold under the name ADICIDE are:
PRODUCT | APPEARANCE | COMPOSITION |
ADICIDE NTK | POWDER | MIT/CIT |
ADICIDE NTL | LIQUID | MIT/CIT |
ADICIDE BTC | POWDER | BIT |
ADICIDE BTL | LIQUID | BIT |
ADICIDE MBL | LIQUID | BIT |
Fixative is applied over glaze surface, so it creates a thin layer that prevents contamination and distortion of the applied decoration on unfired pieces.
In ADITIVOS CERAMICOS we have developed fixatives for use in combination with digital decoration, whether the printing is before or after the application of fixative.
PRODUCT | FEATURE | DILUTION |
ADIFIX H-47 | LOW VISCOSITY FIXATIVE | 8 % IN WATER |
ADICEL H-55 DIG | HIGH VISCOSITY FIXATIVE | 8 % IN WATER |
ADIFIX H-55 DIG | FIXATIVE COMPATIBLE WITH DIGITAL DECORATION | 8 % IN WATER |
Our printing mediums have been formulated to ensure high definition in the final product, and ensure stability and good application of the paste during production.
Our main screen printing mediums are:
PRODUCT | RANGE OF PRODUCT | USE |
BIO Q-20M | ROTOCOLOR | ROTOCOLOR. NON TOXICITY. BIOCOMPATIBLE |
ADIFLUX M-403 | FLAT SCREEN | FLAT SCREEN |
ADIFLUX 3F-131 | 3RD FIRING | 3RD FIRING |
ADIFLUX RC-275 | MASK AND PROTECTION | MASK, LUSTER, METALLICS. |
ADIFLUX RC-275-DIG | COMBINATION WITH DIGITAL TECHNOLOGY | FOR BEING USE IN COMBINATION WITH DIGITAL DECORATION. |
In formulating these products, we must control physicochemical properties to improve application, also the amount of resin to regulate the layer thickness and its solid content.
Our main products are:
APLICATION | PRODUCT | FEATURES |
FLAT SCREEN | ADICEL G-32 | LOW VISCOSITY (Fine and medium granilla) |
FLAT SCREEN | ADICEL G-50 | HIGH VISCOSITY (Medium and Coarse granilla) |
ROTOENGRAVING ROLLS | ADICEL V-1084 | LOW VISCOSITY (Fine and medium granilla) |
ROTOENGRAVING ROLLS | ADICEL V-1084-B | HIGH VISCOSITY (Medium and Coarse granilla) |
DISC AND AIRLESS | ADICEL V-1189 | MEDIUM VISCOSITY (Fine and médium granilla) |
DISC AND AIRLESS | ADICEL V-1174 | LOW VISCOSITY (Fine and medium granilla) |
BELL | ADICEL CGC-102 | LOW VISCOSITY. Pastes with GLUE + Granilla + SERIGRAPHY |
BELL | ADICEL V-1176 | LOW VISCOSITY. Pastes with GLUE + granilla |
Because of the low salt content and zero calcination residue, these products are the most suitable for ceramic industry in general and sanitary ware ceramics in particular.
Key features are:
High rheology control in aqueous solutions.
Viscosity stability over time
High binding capacity
High stability against bacterial degradation.
Excellent stabilizer for glazes.
High compatibility with all types of colloidal materials.
Presentation in the form of finely divided powder.
High solubility.
Colorless and odorless.
The main CMC we sell are:
PRODUCT | PURITY | VISCOSITY |
ADICEL C-3 | >98 % | LOW |
ADICEL C-5/P | >98 % | LOW |
ADICEL C-50P | >98 % | MEDIUM |
ADICEL C-70/P | >98 % | MEDIUM |
ADICEL C-1000 | >98 % | HIGH |
ADICEL C-1000P | >98 % | HIGH |
AUXILIARY ADDITIVES: Those for applications before or after the digital printing, and compatible with inkjet inks.
These products allow us to obtain exclusive final products, applied with definition and design of digital technology.
APLICATION | PRODUCT | FEATURES |
PRIMER | ADIMEL V-1514 | ANTI-STEAM |
PRIMER | PRIMER V-1610 | PRIMER |
PRIMER | ADIMEL V-977 | ANTI - REPELLENT |
PRIMER | ADICEL V-1102/L | RELIEF |
INKJET ADDITIVE | ES-01 | GLUE |
INKJET ADDITIVE | V-1260 | REPELLENT |
INKJET ADDITIVE | ADINET V-1185 | PRINTHEAD CLEANER |
EFECTS | RC-275 | MEDIUM FOR LUSTER AND |
EFECTS | RC-275 | MEDIUM FOR MASKS |
Depending on the chemical composition of the raw materials, we offer various formulations, both solid and liquid.
PRODUCT | APPEARANCE | APLICATION |
ADIPRESS V-1299 | POWDER | SLIP AND PRESS POWDER |
ADIPRES V-1114 | POWDER | SLIP AND PRESS POWDER |
MORLITE V-1212 | LIQUID | SLIP |
We work with defoamers of different nature, to adjust to customer needs both in application of the paste, and chemical composition of it.
PRODUCT | RANGE OF PRODUCT | APLICATION |
ADIMEL C | WETTING AGENT | GLAZES AND PASTES |
ADIMEL V-977 | SUFACTANT | UNIVERSAL |
ADIFOAM IC-20 | DEFOAMER | FIXATIVES, GLUES AND PASTES |
PRODUCT | FEATURES | APLICATION |
ADIMEL C | WETTING AGENT | IMPROVE GLAZE SURFACE |
ADIPLAST | ANTI- SETTLING | SOLID ANTI SETTLING |
ADIMEL V-921 | Ca- Mg | AVOID PINHOLE ON SUFACE |
ADISER O | DRYING | DRYING TIME ACELERATOR |
ANTIPINHOLE | SANITARY WARE | AVOID PINHOLE BECAUSE OF LACK OF DEGASIFICATION |
ADICOL O | ORGANIC COLOURS | MANY COLOURS |
ADITIVOS CERAMICOS have made a wide range of specific products for this production process, from which we highlight:
PRODUCT | FAMILY | APLICATION |
ADISPER | ADDITIVE FOR SLIP BODY | DEFLOCCULANT |
MORLITE 1212 | ADDITIVE FOR SLIP BODY | INCREASE MOR |
ADICAST | ADDITIVE FOR SLIP BODY | INCRESE CASTING RATE |
ADINET LM-85 | CLEANER FOR MOLDS | CLEANER FOR MOLDS |
ADITIVOS CERAMICOS has developed a wide range of specific binders to this production process, formulated for optimum viscosity of the slip. These products include:
PRODUCT | FEATURES | APLICATION |
ADICEL V-874 | INCREASE MOR | BINDER HIGH VISCOSITY |
ADICEL V-874 | INCREASE MOR | BINDER LOW VISCOSITY |
ADICEL -1590 | INCREASE MOR | BINDER MEDIUM VISCOSITY |
ADICEL V-1519s | INCREASE MOR | BINDER MEDIUM VISCOSITY |
ADICEL V-1552 | INCREASE MOR | BINDER MEDIUM VISCOSITY |
ADITIVOS CERAMICOS has developed a specific additive for cleaning tubes of alumina in these machines.
PRODUCT | FEATURES | APLICATION |
SCALNET | CLEANING | X-TRACT |
PRODUCT | APPEARANCE | COMPOSITION |
ADICIDE NTL | LIQUID | MIT/CIT |
ADICIDE MBL | LIQUID | BIT |
ADICIDE BTL | LIQUID | BIT |